In addition to the wet machine,
Energy saving money good nostrum
Before 1. Dehumidifier running will lock all doors and Windows, in order to avoid damp external air into the indoor influence dehumidifying effect, use if there is no need to try to reduce the number of doors and Windows open and close.
2. The dehumidifier due to often move, more prone to cold media leaks, if the compressor running but feel the wind and the return air temperature, should stop using, repairing as soon as possible to avoid waste of energy, and I don't know.
3. At least once every two weeks cleaning air filters, every six months to a year is best to do a check on a regular basis.
4. The dehumidifier should be placed in solid flat on the floor, in order to avoid vibration and noise, and avoid direct sunlight or near a heating apparatus.
How to choose and buy dehumidifier
: 1. Choose the appropriate capacity of dehumidifier dehumidification 0.24 liters to estimate every day such as per square meter room area 8 ping (note: a flat = 3.3 m2), then can choose 0.24 x 8 x 3.3 = 6.3 (liters/day), dehumidifying capacity of the dehumidifier, don't need to use too much of a dehumidifier to avoid waste of electricity.
2. High efficiency of choose and buy dehumidifier: consumer kilowatt-hour (kWh) can remove much moisture from the air as the energy factor, choose energy factor value is greater than 1.00 (l/c) above is accord with the requirement of energy saving.
3. The choose and buy dehumidifier with humidity control, on the one hand, on the other hand, can make indoor maintain humidity can save energy.
4. Choose "energy efficiency label" dehumidifier products, for consumers to buy the rest assured, with peace of mind.
Injection molding machine energy-saving insulation energy saving money good nostrum
1, energy saving
Injection molding machine heater energy (electricity) : save 30% to 60%
Injection molding machine all energy (electricity) : save 5% to 15%
Injection site air conditioning air conditioning efficiency: the biggest improve 50%, saving the heating/cooling
2, improve the quality of molding
Injection heating temperature, can maintain uniform temperature, can reduce the scrap rate
Heater life: extended twice (automatic control heat output)
3, increase productivity,
Operating environment: reduce burns, burns and other dangers
Forming the scene: maintain a comfortable temperature
Shorten the molding operation of standby time
Through the calculation method of economic benefit: the power saving amount (per year)/insulation cover installation costs (each) - can confirm the ROI (%) break-even point.
About six to eight months to recover all the investment costs.
Welcome to inquire, "hundred million source - YIYUAN" sincere service for you!