Nissei injection kits descriptionmolding machine insulation

Nissei injection kits descriptionmolding machine insulation :

     Mainly for injection molding machines, extruders and the die mold heater. Also be used for pipes, elbows, flanges, manholes, tees, chemical reactors, thermal power nuclear steam turbine, gas turbine units, heat exchangers, engine exhaust pipe insulation, heat insulation.

What is the main material?

     Made of glass fiber cotton and imported components, from the inner, insulation and protective layer composed of three layers, the working temperature below 650 ℃. With insulated, waterproof, anti-oil, multi-layer insulation, not spontaneous, not corruption, corrosion resistance, the surface can be cleaned, high strength, easy to bend, environmental pollution, etc. pretty neat appearance. All designs made in accordance with customer needs.

Nissei injection molding machine insulation kits Troubleshooting:
 
A number of energy saving?

     20% -60%, depending on the operating temperature and whether continuous work.

2 surface temperature how many?

     Insulation sleeve surface temperature can be reduced about 40 ℃, do not touch hot.

3 how to install?

     First heater installed in the unit, and then directly to the outside of the heater insulation condom, note the alignment wiring terminals (such as junction boxes, terminal) and Thermocouple holes and fastening with buckle; without changing the machine circuits.

4 How long useful life?

     In the proper maintenance and use of the premise, you can use more than 2 years.

But also to prevent frequent heating heating coil, which can effectively maintain stiffening ring, and screw barrel aging, enhance the overall service life of machinery.

5 quality of plastic products have any effect?

     As the plastic particles are not significantly variable temperature, forming a more stable, more excellent quality.

6 a long time to recover the cost?

     Saving rate of 20% in the case of recoverable costs about 4,5 months, if a higher saving rate, cost recovery is faster.

7-valent what information is needed?

1) The type of heater, such as ceramic, mica, aluminum, etc., different types of the same thickness of the heater

2) Heater size (such as diameter, diameter, length)

3) the location and size of wiring (such as junction boxes, plugs the location and size)

4) the position and diameter of the thermocouple hole

5) Quantity

* It is recommended to provide a heater drawings and photos, make sure the heater and insulation kits fully fit.